Product Description

2,000 PSI 4.0 GPM 5.0 HP Cold Water Electric Pressure Washer with Baldor Motor and CP Triplex Pump

The BE Power Equipment B205EA is a commercial-grade cold water electric pressure washer delivering 2,000 PSI at 4.0 GPM, powered by a 5.0 HP Baldor single-phase electric motor and equipped with a commercial-grade CP CTE2S triplex pump with external unloader and adjustable injector. Designed for commercial and industrial environments where quiet operation, zero emissions, and dependable performance are required, the B205EA delivers sustained cleaning capability without the maintenance demands of a gas-powered unit.

The B205EA operates on 240V single-phase power at 23 Amps and does not include a power cord, plug, or switch. Installation must be performed by a licensed electrician. Verify that a 240V single-phase circuit with sufficient amperage capacity is available at the installation location before ordering.

Built on the 125 Dealer Frame with powder-coated steel construction, 12" Premium flat-free tires, and integrated accessory storage, this unit is engineered for mobility across commercial facilities, equipment yards, and maintenance environments.

Built for Demanding Commercial Applications

The B205EA is designed for professionals who need consistent electric cleaning performance in commercial environments. It is well suited for:

  • Fleet vehicle cleaning — trucks, trailers, and service vehicles
  • Agricultural cleaning — tractors, harvesters, and animal enclosures
  • Shop maintenance — garage floors, tools, and heavy equipment
  • Construction sites — surface preparation and material cleaning
  • Manufacturing facilities — removing industrial residue from surfaces and machinery

Features

5.0 HP Baldor Single-Phase Electric Motor

The B205EA is powered by a 5.0 HP Baldor single-phase electric motor, built for continuous-duty commercial use. Key motor features include:

  • Reliable, consistent torque and smooth power delivery for sustained commercial cleaning
  • Low noise operation for indoor and noise-sensitive environments
  • Zero exhaust emissions for use in enclosed facilities
  • Fuel-free operation — no fuel storage, fuel management, or engine maintenance required
  • 240V single-phase at 23 Amps — requires dedicated circuit and licensed electrician installation

The unit does not include auto start/stop — the motor runs continuously while the unit is powered on, regardless of trigger state.

Commercial-Grade CP CTE2S Triplex Pump with External Unloader

Paired with the Baldor motor is a commercial-grade CP CTE2S triplex pump with external unloader and adjustable injector, engineered for sustained continuous-duty commercial operation. Key pump features include:

  • External unloader with dump-to-ground bypass — releases pressure to ground when the trigger is released, reducing pump stress and heat during idle periods
  • Thermal relief valve to prevent pump damage during extended bypass operation
  • Smooth, consistent pressure delivery at 2,000 PSI and 4.0 GPM

The B205EA uses an adjustable injector — detergent concentration can be set to match different surfaces and cleaning applications.

Electric Direct Drive System

The B205EA uses an electric direct drive system that connects the motor directly to the pump. This design minimizes moving parts compared to belt-driven systems, reduces vibration, and provides a compact footprint for use in commercial spaces.

125 Dealer Frame with Powder-Coated Steel Construction

The B205EA is built on the 125 Dealer Frame, a hand-truck style platform with powder-coated steel construction. The frame includes integrated accessory storage for the hose, wand, and nozzles, with stabilizing feet for steady operation.

50-Foot x 3/8" Single Wire Braided High-Pressure Hose

The included 50' x 3/8" QC single wire braided rubber hose provides durability and extended reach for cleaning large commercial areas without repositioning the unit.

36" Insulated Spray Wand and Trigger Gun

The included 36" QC insulated gun and wand assembly provides reach and control for high, low, and hard-to-reach cleaning angles across commercial applications.

4 Quick-Connect Spray Nozzles

Four quick-connect nozzles cover a full range of commercial cleaning applications:

  • 15°: Concentrated pressure for heavy surface cleaning
  • 25°: General-purpose washing
  • 40°: Wide-angle rinse for delicate surfaces
  • Soap: Low-pressure nozzle for applying detergent through the adjustable injector

12" Premium Flat-Free Tires

The 12" Premium flat-free tires roll easily across shop floors, outdoor terrain, and uneven pavement without requiring air inflation.

Safety Features

  • Thermal relief valve: Releases built-up heat from the pump during extended bypass operation
  • External unloader with dump-to-ground bypass: Reduces pump stress and heat when the trigger gun is not engaged

Warranty and Factory Testing

The B205EA is backed by a multi-component warranty from BE Power Equipment:

  • Motor: 2-year limited warranty
  • Pump: 5-year limited warranty

Each unit is functionally tested at the factory before shipping. Your pressure washer may arrive with minimal residual pump oil odor, which confirms the unit has passed quality testing and is ready for installation.

Product Specifications

  • Pressure: 2,000 PSI
  • Flow Rate: 4.0 GPM
  • Motor: Baldor 5.0 HP, 240V, 1 Phase, 23 Amps
  • Pump: CP CTE2S Triplex, External Unloader, Adjustable Injector, Thermal Relief Valve
  • Drive Type: Electric Direct Drive
  • RPM: 1,725
  • Voltage: 240V
  • Power Connection: No Cord, Plug, or Switch — licensed electrician installation required
  • Auto Start/Stop: No — motor runs continuously when powered on
  • Frame: 125 Dealer Frame, Powder-Coated Steel with Onboard Accessory Storage
  • Hose: 50' x 3/8" QC Single Wire Braided Rubber Hose
  • Spray Wand: 36" QC Insulated Gun/Wand Assembly
  • Nozzles: 4 Quick-Connect, 15°, 25°, 40°, and Soap
  • Wheels: 12" Premium Flat-Free Tires
  • Pump Oil Type: 30W Non-Detergent
  • Unit Weight: 126 lbs / 57.2 kg
  • Unit Dimensions: 25.0" x 34.0" x 42.0"
  • Series: Commercial
  • Country of Origin: Canada
  • Safety Features: Thermal relief valve, external dump-to-ground unloader
  • Warranty: Motor 2 Years / Pump 5 Years
  • Factory Testing: Each unit is functionally tested before shipment. Minimal residual pump oil odor upon delivery is normal and confirms quality testing has been completed.

Included in the Box

  • 50' x 3/8" QC Single Wire Braided Rubber Hose
  • 36" QC Insulated Gun/Wand Assembly
  • 15°, 25°, 40°, and Soaper QC Nozzles

Package Information

  • Box Weight: 132 lbs / 59.9 kg
  • Box Dimensions (L x W x H): 32" x 25" x 27"

Actual product may vary slightly from images shown. All BE Power Equipment pressure washers are functionally tested at the factory and may contain minimal residual pump oil odor upon delivery.

Commercial Electric Cleaning Performance — Built by BE

The BE Power Equipment B205EA delivers 2,000 PSI and 4.0 GPM of commercial electric cleaning performance through a 5.0 HP Baldor single-phase motor and a CP CTE2S triplex pump with external unloader and adjustable injector. Built on the proven 125 Dealer Frame with 12" Premium flat-free tires, requiring 240V single-phase hardwired installation, this unit is engineered for commercial operations that need dependable electric cleaning performance without fuel, fumes, or complex engine maintenance.

B205EA — 2,000 PSI 4.0 GPM 5.0 HP Cold Water Electric Pressure Washer with Baldor Motor and CP Triplex Pump.

Customers also bought

    • FREE SHIPPING IN USA

      Free shipping with every order

    • SATISFACTION GUARANTEED 

      If your order arrives defective or

      fails to function properly, you will receive a full 100% refund!

    • PREMIUM CUSTOMER SUPPORT

      Connect with us through email, or

      phone, and we will address any questions you may have!

    • SECURE ENCRYPTED PAYMENTS

      We utilize advanced encryption to

      ensure there is never an issue with your privacy.